07-09-2015, 09:56 AM
سلام دوستان
این سایت همه چی رو کامل گفته با سایز و شکل و مشخصات برای تمام کشورها
http://www.worldstandards.eu/electricity...d-sockets/
![[عکس: electricity-tiles-type-A-200-px.jpg]](http://www.worldstandards.eu/WordPress/wp-content/uploads/electricity-tiles-type-A-200-px.jpg)
Type A is used, for instance, in North and Central America and Japan
This class II ungrounded plug with two flat parallel prongs is pretty much standard in most of North and Central America. It is known as NEMA 1-15 and was invented in 1904 by Harvey Hubbell II. The plug has two flat 1.5 mm thick blades, measuring 15.9 – 18.3 mm in length and spaced 12.7 mm apart. Type A plugs are generally polarised and can only be inserted one way because the two blades do not have the same width. The blade connected to neutral is 7.9 mm wide and the hot blade is 6.3 mm wide. This plug is rated at 15 A.
این سایت همه چی رو کامل گفته با سایز و شکل و مشخصات برای تمام کشورها
http://www.worldstandards.eu/electricity...d-sockets/
Type A is used, for instance, in North and Central America and Japan
This class II ungrounded plug with two flat parallel prongs is pretty much standard in most of North and Central America. It is known as NEMA 1-15 and was invented in 1904 by Harvey Hubbell II. The plug has two flat 1.5 mm thick blades, measuring 15.9 – 18.3 mm in length and spaced 12.7 mm apart. Type A plugs are generally polarised and can only be inserted one way because the two blades do not have the same width. The blade connected to neutral is 7.9 mm wide and the hot blade is 6.3 mm wide. This plug is rated at 15 A.
